PTFE PFA Lined ball valve

PTFE PFA lined ball valve introduction

Fluorine lined ball valve (PTFE PFA lined ball valve) the lining material adopts the FEP (F46) and PTFE (F4), PFA,PO, FRPP fluorine plastic, PTFE PFA lined ball valve can be applied to all kinds of the concentration of sulfuric acid, hydrochloric acid, hydrofluoric acid, aqua regia, and all kinds of organic acid, strong acid, strong oxidizer and other corrosive medium pipeline.
 
Fluorine lined ball valve (PTFE PFA lined ball valve) body is a two-piece precision casting structure, with PTFE, F46, or PFA lining in the valve body chamber and valve core, providing excellent resistance to chemical fluid corrosion.Airtight class bidirectional sealing, valve ball, seat through precision machining, to ensure zero leakage of the valve.The full size provides the same CV value as the pipe.Fluorine lined ball valve (PTFE PFA lined ball valve) can be widely used in petroleum, chemical industry, electronics, metallurgy, medical power, environmental protection and other industrial sectors, can realize the acid, alkali and other strong corrosive media circulation and cut off.
 

PTFE PFA lined ball valve performance

Nominal size: DN15- DN400,1/2’’-16’’
Nominal pressure: PN1.0Mpa, 1.6Mpa,CL150
Body material:WCB,CF8,CF8M,CF3,CF3M,ect.
Lining material: FEP (F46) and PTFE (F4), PFA,PO, FRPP
Operating temperature: -40 ~ +180℃;
Gland type: bolt compression type
Packing: Teflon packing
Fluorine lined ball valve assembly
Flow characteristics: approximate equal percentage
Rated stroke: 90° full open
 
PTFE PFA lined ball valve with pneumatic actuators:
Type: AT/SR, AW/AWS, GTD/GTE double action, single action piston type actuator
Air supply pressure: 0.3 ~ 0.8mpa
Air source interface: G1/4 ", G1/8 ", G3/8 ", G1/2"
Ambient temperature: -30 ~ +70℃
Action type of PTFE PFA lined ball valve
Single acting actuator: gas closed type (B)-- valve position open (FO) when gas is lost;Gas open type (K)-- Valve position closed when gas is lost (FC)
Double-acting actuator: gas-close type (B)-- valve position is maintained when gas is lost (FL);Gas opening type (K)-- Valve position maintenance (FL) when gas is lost
PTFE PFA lined ball valve accessories
Positioner (TYPE YT1000), solenoid valve, air filter and pressure reducer, position preserving valve, travel switch, valve position transmitter, handwheel mechanism
 
PTFE PFA lined ball valve with electric actuators:
Optional electric type: QT series, HT series
Power supply optional: AC220V, AV380V (other special)
Ambient temperature -30℃~+70℃
Protection level:IP67
Functional Options:
Explosion-proof type: ExdIIBT3/4
Signal feedback：X3 mechanical passive signal, X2 active signal
Heater function: the actuator components can be dried in a humid environment
Manual function：Electric actuator with manual valve opening and closing functions
Adjusting type：input 4~20mA signal, achieve the ball valve adjustment function
 

PTFE PFA lined ball valve feature

The structure of PTFE PFA lined ball valve is full diameter floating ball (two-stage type) and full diameter fixed ball (three-stage type) (small diameter is two-piece type, large diameter is three-piece type), PTFE PFA lined ball valve is mainly used to cut off or connect the corrosive medium in pipeline and can be used for fluid regulation and control. Compared with other valves, PTFE PFA lined ball valve has the following features:
1. Small fluid resistance, the lining of the ball valve inner wall smooth, smooth flow passage is the least resistance of all valves.
2. The switch is fast and convenient, and only need to rotate the sphere 90° to complete the opening and closing action.
3. Special molding process is adopted to line the lining material on the inner wall of valve shell, which can withstand the corrosion of strong acid and strong alkali media.The liner sphere is combined with the PTFE seat for good sealing and zero leakage.
4. Pneumatic, electric, hydraulic and other driving devices can be configured to achieve remote control and automatic operation.
5. The ball is integrated with the valve stem to eliminate the rotation Angle difference, eliminate the risk of valve stem rushing out of the body due to pressure changes, and ensure the safety and reliability of use.
6. The ball valve with fluorine plastic lining has extremely high chemical stability and is suitable for any strong corrosive chemical medium;
7. Adopt all-pass floating ball valve structure to shut off the element leakage within the whole pressure range, so as to facilitate the pipeline system to sweep the line through the ball and maintain the pipeline.
 

Fluorine lined ball valve Lining material

Polyperfluoroethylene FEP (F46)
Applicable medium:Any organic solvent or reagent, dilute or concentrated, free of organic acids, bases, ketones, aromatics, chlorinated hydrocarbons, etc.
Service temperature:- 85 ~ 150
Features: Mechanical, electrical properties and chemical stability are basically the same as F4, but outstanding advantages are high dynamic strike toughness, excellent weather resistance and radiation.
 
Polypropylene: RPP
Applicable medium: aqueous solution of inorganic salts, dilute or concentrated solution of inorganic acids and bases.
Operating temperature: -14~80
Feature: one of the lightest plastics, its yield, tensile and compression strength, hardness are better than low pressure polyethylene, has a very outstanding rigidity, good heat resistance, easy to shape, excellent.After modification, dynamic impact, fluidity, bending elasticity.
 
Polytetrachloroethylene PTFE(F4)
Applicable medium: strong acid, strong base, strong oxidant, etc.
Operating temperature: -200~180
Feature: excellent chemical stability, high heat resistance, cold resistance, low friction coefficient, excellent self-lubricating material, but poor mechanical properties, poor fluidity, large thermal expansion.
 
Polyolefin: PO
Applicable medium: acid base salt of various concentration and some organic solvent.
Operating temperature: -58~80
Feature: It is the world's most ideal anticorrosive material, has been widely used in rotary forming large equipment and pipe lining.
 
Soluble polytetrafluoroethylene：PFA
Applicable medium: strong acid, strong base, strong oxidant, etc.
Operating temperature: -50-180
Feature: excellent chemical stability, high heat resistance, cold resistance, low friction coefficient, excellent self-lubricating material, but poor mechanical properties, poor fluidity, large thermal expansion.The performance is better than F4, and the color is transparent but white .
 

PTFE PFA lined ball valve application

PTFE PFA lined ball valve to control the opening and closing of all kinds of strong corrosive medium in the design,which has corrosion resistance, ageing resistance of ptfe (F46) this product is suitable for the corrosive liquid and gas in the pipeline transportation industry, the strong acid, alkali, salt and other corrosive medium can work well.Full size valves provide large flow rates and can be used to sweep lines to clean or isolate piping for delivery.
PTFE PFA lined ball valve is mainly used in the production process of acid and alkali and other strong corrosive medium regulation or cut off.Widely used in food, environmental protection, light industry, petroleum, papermaking, chemical industry, light textile, electric power and other industries of automatic adjustment and remote control system. Fluorine lined ball valve to control the opening and closing of a variety of strong corrosive media professional design, PTFE PFA lined ball valve is widely used in petroleum, chemical, dyeing, pesticide, acid and alkali industry, is the most ideal choice of anti-corrosion valve.